• +66 (0) 76 670 195
  • +66636502456
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Mon-Fri 8:00-17:30

How to Choose the Right CAD Extension file for your CAE task

Import and export in the right format helps with data integrity and minimizes errors and rework. Furthermore, importing and exporting the "right" format can also be helpful when it comes to checking data for integrity or minimizing error corrections.

Why Choosing the right cad extension is so important

Why Choosing the Right CAD Extension is So Important.


CAD is becoming the future practice of MCAD, with the next generation of engineers working directly with 3D models to add new features such as flight control systems, sensors, and other components. When it comes to models - based definitions and checking CAD derivatives for Boeing DPD requirements - look for a good CAD format that is easy to translate. This standard has a well-known structure, is documented, and is subject to a set of rules and guidelines, as well as a set of guidelines for the use of the format.


SIEMEN are proprietary and must be translated and validated for subsequent processing. Today we are looking for the best solution for CAD translation and validation, especially in the context of digital transformation (MBD). Capvidia is the source for all CAD translations and validations, especially mechanical CAD conversion.


The Initial Graphics Exchange Specification (IGES) is the reigning champion of CAD file formats. STEP arrived, it is the most popular file format for mechanical CAD conversion and is currently being re-evaluated.

IGES Files
IGES Files


IGES files may still be available, but I would not recommend translating them into modern CAD designs. This file format contains geometric data for the model, but no information about the relationships that parts have in assembly.


At the time of writing, the IGES standard will not include any future updates, so your CAD tools will work just as well as before. When you start translating CAD data from a native format to a neutral format, it is normal to see a certain loss of feature quality.


If you export your design as a step from an IGES file, you lose some parametric data, but you can export the geometry model and the mesh data. You can import and export parts in VDA / FS format or export them as part. For more information, see the section called "Import parts to files in V DA / FFS format" and "You can import parts in Vda / fs format."


The format parts in VDA / FS format are similar to those in IGES format because they need to be repaired so that you can use them in the same way as parts imported in IGes format from Abaqus CAE. The VDA and FS formats can be used similarly to parts imported to AbqusCAE in IGE format, but they are repaired so that they can be used as part of their own design. The IG ES format allows for many interpretations and is considerably more flexible than the V DA / FFS format for parts.

Exporting files for Nastran

Exporting files for NASTRAN


You can export data from Abaqus CAE model jobs into the Nastran mass file format and import your Nastsran model data into NASTran input files into AbqusCAE. For a complete list of supported companies and their data formats, see "translate" or "NASTRAN" for a complete description of each supported company and its data format. You can import and export all data for your Ab QaE models and jobs to the "Nastrans" mass file formats.


A list of formats supported by TransMagic products can be found on the CAD Formats page. Note: There are a number of well-known CAD file extensions for formats that can be read and written by transMagic.

Companies that specialize in CAD translations often receive many questions about their data formats. To ensure that you get the best possible support for your customers, we have compiled a complete list for each company and its data format to make it as easy as possible for you to get it.


Therefore, we have provided a common and well-defined language with which two software systems can communicate with each other. Brep and Visrep formats have been added to the list because there is often confusion about what they are.

CAD Files Extension

CAD File Extensions


CAD file extensions for models that enable the creation of models in a variety of formats, including CNC, CAD and CADX, and a range of other formats.


Although IGES files are no longer developed, they are still used to transfer data between CAD, CAM, and CAE software programs. STEP and QIF are two of the most sophisticated formats and standards that ensure the ability to consistently import data into a CAD system. Both are ubiquitous in multiple CAE software and are used across industries as well as in a variety of other applications.


It is a neutral file type and can be used by most CAD products and is one of the most widely used CAD file formats.


This file type is a highly compressed version of the CAD file that is useful for viewing, printing, and transferring your design. It is also a neutral file type that allows you to support many different file types. DWF file is saved in a compressed format to reduce the size of your file, and it can easily be reused - as a file extension.

How to Choose The Right CAD File

How To Choose The Right Cad File

CAD (Computer-Aided Design) file extensions exist, each with its own names, formats, and parameters. It is difficult to distinguish between them all, but this post will help you understand which file is best suited for uploading to your 3D printer or 3D printing.


Pro Engineer, SolidEdge, and AutoCAD all use different CAD file formats and we are here to check the differences between them. The discussion will also include the use of neutral CAD file formats for data exchange between different CAD software.


AutoCAD supports all CAD file formats and is mainly used for the creation of designs, but 3D is also possible in it and 2D in SolidEdge as well as in some other programs.


SolidEdge supports all CAD file formats, so to create a dwf file format, you need to go to the Plot Device tab of the file plot below the file plot. Opening a Solid Edge model could save the model and all other file formatting files in one file. The DWF plotter must be selected, and the plotter type (eplots, plotster, plot - plotster, etc.) and its parameters must be specified, go to the tablature plots and devices under File plots.


Each CAD program has its own file type, but the most useful neutral format is the IGES step, so it should be able to create all the required files. So you can see that the export of files is almost similar in most CAD programs, and the selection of one or two suitable file formats is important before you make the decision to export the CAD file in order to get the desired result before you export the file.


Not all files can be imported from one person to another, as some native files offer only one or two options for using a particular program, so it is important to understand the different file formats. All problems with importing CAD files slow things down and cause problems for the user, and it is important that you understand them all, especially if you need to import them all.


This type of CAD file format uses generic information and standardized protocols, so many programs understand the content it contains. This is primarily for solid bodies and mesh bodies, but can also be useful if you need to share documents with external sources.
For example, you want to share a CAD product design with a customer who does not have access to a specific CAD program.


There can be a somewhat steep learning curve when it comes to technical software, but if you have difficulty creating or finding your current CAD file, there are many designers who will be able to make it for you. This means that a CAD designer can quickly and efficiently create a visualization of your product that is suitable for shipment to the manufacturer. Although CAD drawings have become standard in many industries, it is not always a paid tool that can meet all your needs.


Overall


Overall, the best approach when changing the manufacturer is to get the original CAD drawings from your current manufacturer and, if necessary, refine your design from there.


This article examines some of the limitations and considerations that designers encounter when working with alternative CAD packages used by suppliers and customers. There are a number of 3D and 2D standards that SOLIDWORKS users want to import and export. We look at the limitations you need to understand in order to successfully import your model in various formats, as well as the options that other CAD users accept.


Many export formats - only formats are designed for rapid prototyping and web pages but have lower accuracy and a limited number of export options for other formats.


When you start translating CAD data from a native format to a neutral one, it is normal to notice a certain loss of features and quality. CAD tools will work just as well in neutral formats as they do in native formats, but with a few minor changes.
For example, if you export your design as a step-by-step IGES file, you will lose some, but not all, parametric data.


Often this is not the case when you load a file that turns into a monolithic lump that is difficult to edit, much like an IGES file. Most CAD packages can load their own native formats, and most of them have neutral formats that support them. This is especially true for 3D printing, where the slicer does not have to manipulate the CAD data too much.


If your package does a good job in a neutral format, why would you use native or proprietary formats and why not a native file extension?
Modern PCB software performs a DFM check before breaking through your design with multiple tanners, which should reduce the risk of working with an older file format and the potential for errors.

Cited Sources